Home › Products › Cleanouts

Cast Iron Sewer Cleanouts & Drain Covers

Cleanout frames and covers from 4" to 12", including gasketed drain covers and floor and yard drains.

DomCast Metals supplies cast iron sewer cleanout frames and covers from 4" through 12", including units with built-in gaskets, cast iron floor and yard drains, and a filler box.

Size is stated in each product name. Confirm the cleanout size against the riser it caps at quote time. Canadian-owned supplier.

Request a QuoteBrowse Full Catalog

Catalogue at a glance

SKUNameTypical use
DF444" Sewer Cleanout Cover and FrameCleanout cover and frame for a four inch riser.
DF44G4" Drain Frame and Cover with Built in GasketsGasketed drain frame and cover, where a seal between cover and frame is wanted.
DF66G6" Drain Frame and Cover with Built in GasketsGasketed drain frame and cover, where a seal between cover and frame is wanted.
DF66I6" Sewer Cleanout with Built-in-GasketGasketed sewer cleanout. Order by the riser size in the name.
DF888" Sewer Cleanout with Built-in-GasketGasketed sewer cleanout. Order by the riser size in the name.
DF88G8" Cast Iron Floor/Yard Drain with Built in GasketFloor or yard drain with built-in gasket.
DF101010" Sewer Cleanout with Built-in-GasketGasketed sewer cleanout. Order by the riser size in the name.
DF121212" Filler BoxThe largest unit in the family. Confirm the intended use at quote.

Dimensions, weights and compliance with a drawing revision are confirmed per SKU at quote; the catalogue names are the published reference.

Choosing a pattern

A sewer cleanout cover caps the riser that gives crews rodding and camera access to a buried lateral or main. The frame sits at grade and the cover lifts off when access is needed. The catalogue has four families, and the size in each product name is the size it fits.

Where a cleanout sits matters as much as its size. A unit in a lawn or boulevard sees foot traffic; one in a driveway or roadway sees wheel loads, and the casting has to be rated for it. Load ratings explained covers what the classes mean. For the material question, see ductile vs grey cast iron.

How to specify for a quote

Send these and we can quote the right casting the first time:

Use the cleanout enquiry form, email sales@domcastmetals.com or call 519 972 3901. Registered customers can pull drawings through drawing access.

Browse the catalog

All cleanoutsSewer grates & drain coversCatch basin frames & coversRequest a quote

Products (8 SKUs)

Common questions

What sizes do you stock?

The catalogue runs from 4" through 12". Each product name states its size. See the catalogue table and product list on this page.

What does “built-in gasket” mean on these covers?

Several cleanout and drain covers are listed with a built-in gasket. Confirm the sealing requirement for your application when you request a quote.

Is a cleanout cover the same as a drain cover?

No. A cleanout cover caps a riser so crews can open it for rodding or camera access. A floor or yard drain is open on top and collects surface water. The catalogue lists both; order by the name.

Can a cleanout cover sit in a driveway or a road?

Only if the casting is rated for the wheel loads it will see. Tell us where the unit sits when you ask for a quote and we will confirm the right class. Load ratings explained on this site walks through the classes.

Which size do I order?

Match the riser size in the product name to the riser you are capping. If the riser is an odd size or an old pipe, measure it and send the measurement with the request; we confirm fit at quote.

Do you supply drawings?

Registered customers can download product drawings through the drawing access area of this site. Ask for an account when you request a quote.

Where do you ship?

DomCast Metals is a Canadian-owned supplier in Windsor, Ontario, serving contractors, municipalities and distributors. See the Serving Ontario page for how we work across the province.